TSP SERIES
TSP Non-clogging self-priming sewage pump is our latest developed product, and is suitable for the treatment project of municipal sewage and industrial sewage as well as stage treatment and concentrated treatment system of various sewages. It’s known as “King of Self-Priming Sewage Pump”, and the most ideal new-generation sewage product.
APPLICATION
| • |
Non-flammable and non-explosive liquid |
| • |
Rain water and common sewage |
| • |
Municipal drainage project, construction site, drainage
station of people’s air defence system |
| • |
Industrial sewage of light industry, paper mill, textile, food processing plant, chemical industry, electric utility, deep mines etc |
| • |
Sewage discharge in the residential area |
| • |
Sewage and deposit of water purifying system |
| • |
Tanning industry, sewage of slaughter house, fish breeding in the river and pond |
| • |
Wind and sugar industry |
| • |
Sewage discharge not having strong corrosiveness but seriously polluted |
MODEL CODE
| Self-priming sewage pump : |
TSP |
| Inlet and outlet: 4” (Φ100 mm) : |
4 |
Operating Condition
| • |
Liquid temperature: 0°C – 40°C, medium density ≤1.2 x 103
kg/m3 , PH5-9 |
| • |
Volume ratio of solids in the medium ≤ 2% |
| • |
Diameter of maximum grain free pass: TSP-2: 38 mm TSP-3: 63 mm TSP-4 to TSP-10: 76 mm |
| • |
Ambient temperature: ≤ 40°C |
| • |
Altitude: Max. 1, 000 m |
| • |
Max working pressure: see Performance Curve |
| • |
Max Suction head: see Performance Table |
TFG SERIES
The TFG series are with two back to back impellers (with axial thrust balancing). It uses is ideal for high head values where single impeller types are hard to reach. Suitable for civil and industrial boosting, firefighting plant, flood irrigations, etc. it uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers and loading extremely. These pumps should be installed in a covered area, protected against the weather.
GENERAL
| Pump body : |
Cast iron |
| Impeller : |
Brass |
| Motor : |
Closed, Externally ventilated |
| Insulation class : |
F |
| Protection class : |
IP54 |
| Duty : |
Continuously rated |
| Mechanical seal |
Ø16, Ø18, Ø25 Ceramic steatite / Graphite |
| Shaft |
Stainless steel AISI 420 |
TRE SERIES
The Trosx Series TRE series fully conforms to the pump standard DIN EN 733 (formerly DIN 24255) and covers all sizes nominated. This makes the range fully interchangeable with other brands of pump designed to this standard.
‘BACK PULLOUT’ FEATURE
| • |
If spaces coupling is installed, pump can be separated
from the driver without having to dismantle the driver or
pump the common skid. |
| • |
Bearing housing assembly can be removed for repair or servicing without having to disturb the connected piping. |
WORKING PRESSURE
Maximum pressure rating to 16 bar
(Some models operating at 10 bar)
CAPACITY
Capacity range up to maximum of 330 litres/sec (1200m³/hr)
DISCHARGE PRESSURE
Discharge pressure range up to maximum of 150 metres
(15 bar)
SPEED OF ROTATION
Maximum operating speed up to 3500 r.p.m
PUMPED LIQUID
Clean, without solid or abrasive substances, not viscous not aggressive, not crystallized and chemically neutral, close to water characteristics.
LIQUID TEMPERATURE RANGE
From -10° + 0 + 140°C
SPECIAL VERSIONS ON REQUEST
Pumps for liquids other than water other voltages and / or frequencies.
Reviews
There are no reviews yet.